Box Hill / Custom Sunroom
Part of an elevated deck in Box Hill was enclosed as a custom sunroom. The approximately 6.2m × 3.5m addition combines a light-transmitting roof with insulated lower wall panels beside a weatherboard home.
Discuss a similar project with Furite
Project at a glance
| Location | Box Hill, Melbourne |
|---|---|
| Approximate dimensions | 6.2m × 3.5m |
| Setting | Part of an elevated deck |
| Roof | 3mm solid polycarbonate |
| Lower walls | Double-layer insulated panels |
The site and the problem
The homeowner wanted more usable sheltered space for everyday family activities and storage, while keeping part of the deck open to the outdoors.
What the client needed
- Enclose only the selected deck area.
- Fit the existing roofline and weatherboard exterior.
- Balance daylight with privacy.
Design and installation approach
The sunroom was measured to suit the existing deck and house. Its footprint leaves a portion of the outdoor area outside the enclosure.
Polycarbonate roofing admits natural light. Insulated lower panels provide a more private base to the walls, while the upper areas keep the room visually connected to its surroundings.
The result
The elevated home has an additional enclosed deck area and retains an outdoor section. The room combines a bright roof with lower panels that limit direct views inside.
Project photographs and references
Questions about this project
Was the whole deck enclosed?
No. The project description specifies that only part of the existing deck was enclosed.
Why use solid lower wall panels?
They add privacy at the lower portion of the room while allowing the upper areas to remain light.
Discuss your project
Send Furite Outdoor Living photographs of your site, approximate dimensions and the main issue you want to solve. Our Melbourne team can discuss a suitable design and arrange a site measure.
Request a site measure and quote · Browse more Melbourne projects