FURITE OUTDOOR LIVING · POOL ENCLOSURES
Open your pool to the outdoors. Add shelter when you need it.
A retractable pool enclosure uses sliding, telescopic sections above the water. It can help keep leaves out and shelter the pool when closed, then retract to open part of the pool area. The right design depends on your pool, surrounding paving and the space available for the sections to stack.
Furite Outdoor Living offers aluminium-framed, polycarbonate pool enclosures. Based in Springvale, we serve Melbourne and Greater Melbourne, with Australia-wide installation also available. Send your location so we can confirm assessment and installation arrangements for your project.
MELBOURNE PROJECT EXAMPLES
A fixed enclosure keeps its roof and main frame in place, with doors providing access and ventilation. A retractable enclosure uses movable sections that slide and stack to open part of the pool area. These local projects show the difference.
KEW · FIXED GLASS ENCLOSURE
9.2m × 4.6m, with a maximum height of 3.1m. Powder-coated aluminium framing, a curved toughened glass roof and sliding glass doors. The roof stays fixed while the doors open.
View the Kew fixed enclosure case study →CAMBERWELL · RETRACTABLE ENCLOSURE
9.7m × 3.2m, with a maximum height of 0.8m. White powder-coated aluminium framing and clear polycarbonate panels. Sliding sections open the pool for access.
View the Camberwell retractable case study →Browse more Melbourne projects or discuss a fixed or retractable enclosure for your pool.
COMPARE THE OPTIONS
Compare the roof height, shape and opening arrangement in these design reference images. They illustrate enclosure options; project locations and installation details are not specified.
A broad curved roof shelters the pool and part of the surrounding area. The covered footprint and track positions need to fit the paving and poolside access.
A taller arched layout provides more enclosed space above and beside the water. Confirm usable headroom, door access and ventilation for your proposed design.
An angular roof keeps the enclosure close to the pool. Plan the opening position and access to the water around the enclosure height.
Nested modules show how the enclosure can retract towards one end of the pool. Leave enough room for the stacked sections and everyday poolside access.
A low curved roof follows the length of the pool. Sliding sections can uncover part of the water, with the opening determined by the module layout.
A shallow enclosure covers the pool with a restrained profile. Confirm the roof clearance, track support and stacking area before choosing this arrangement.
KNOW WHAT YOU ARE CHOOSING
A useful specification explains how the whole system fits your property. Confirm these details in writing before ordering.
| Frame and finish | Aluminium profile specification, frame dimensions, finish, colour and fixing details. |
|---|---|
| Roof and side panels | Polycarbonate type, thickness, tint, published performance data and care instructions for the selected product. |
| Size and clearance | Overall length, width and height; usable headroom; pool-edge clearance; and the space occupied by stacked sections. Maximum size depends on the system and engineering. |
| Opening and access | Manual or motorised operation, where available; direction of travel; tracks; doors; locks; and the amount of pool area that can open. |
| Site preparation | Track support, foundations, paving, drainage, installation access and any electrical work required by the selected system. |
| Documentation | Structural design, applicable approval requirements and how the enclosure interacts with the existing pool barrier. |
| Price and timing | Included work, exclusions, delivery, payment stages and a schedule based on the agreed design and site conditions. |
| Warranty and handover | Written coverage, duration and exclusions for materials, moving components and installation, plus operating and maintenance instructions. |
A CLOSER LOOK
Explore the original product diagrams below. The accompanying notes explain what to check for your selected system. Supplier illustrations are references; your project specification confirms the materials, dimensions and performance.
Compare low-profile cover designs with taller enclosures. Choose the height around how you want to use the pool and surrounding space.
This original supplier chart is retained as a reference. The current written quote confirms sizes, materials, operation and timing; “no limited” and “20 days” are not project commitments.
The frame supports the panels while tracks guide the sliding modules. Door positions, locks and the opening arrangement need to work with your pool layout.
Panel performance varies by product. Demonstration images and overseas classifications do not establish the fire or impact rating of your selected panels; request the relevant product documentation.
Clear and tinted panels admit different amounts of light and heat. Confirm the selected panel’s published UV and light-transmission data rather than applying the illustration’s figures to every roof.
Retractable sections overlap and stack to open the pool area. Track length, module sizes and stacking space determine how much can open.
Modular aluminium framing forms the enclosure. Frame sizes, fixings and wind performance must be confirmed for the selected system and site.
Roof profiles can change the usable height and overall appearance. Available shapes depend on the system, span and site requirements.
Use these illustrations to compare the appearance of low and high enclosures. Confirm which styles can be supplied for your project.
Compare clear and tinted panel options. Availability and the appearance of actual samples should be confirmed before selection.
PLAN YOUR PROJECT
To start a useful discussion, send your suburb or postcode, approximate pool length and width, and photos showing the pool, paving, fencing and access. Tell us whether you want a low cover or a taller enclosure and where you would like the sections to stack.
Cost and timing depend on size, panel choice, opening system, site preparation, delivery and installation requirements. We can discuss suitable options and confirm site-measure availability for your location.
Request a project-specific quotePractical answers about choosing, planning and caring for a retractable pool enclosure in Melbourne.
A conventional pool cover usually covers the water surface or spans the pool opening. A retractable pool enclosure is a framed structure with movable sections above the pool. Depending on its height and layout, it can shelter the water and some surrounding space. Compare the actual structure, opening clearance and intended use when assessing products described as movable pool covers.
Telescopic sections slide and nest together to open part of the pool area, then extend to provide overhead protection. The amount of open space depends on the section layout, track length and available stacking area. Ask Furite to confirm the opening arrangement and whether manual or motorised operation is available for your proposed system.
Aluminium framing and polycarbonate panels are used in Furite's pool enclosure range. The frame finish, panel type, thickness and UV protection should be confirmed in your written specification. Wind exposure, fixing details, drainage and site conditions also need assessment; the material name alone does not establish a structure's wind rating or compliance.
Planning and building permit requirements need to be checked for your particular property and enclosure design. Relevant considerations may include dimensions, location, boundaries, overlays and effects on the existing pool barrier. Confirm the requirements with your local council and a registered building surveyor before proceeding. A quotation or site measure is not an approval.
An enclosure can help keep leaves and other debris out and may reduce heat loss when closed. The effect on cleaning and energy use depends on the enclosure, ventilation, weather, pool heating system and how often it is opened. Savings are not guaranteed, and routine water treatment, filtration and pool maintenance are still necessary.
Do not assume that a pool enclosure replaces a compliant safety barrier. Any proposed arrangement must be assessed against the requirements that apply to your pool, including access and gates. In Victoria, pool barrier compliance must be checked by an authorised registered practitioner. Confirm the design before changing an existing barrier, and maintain appropriate supervision around the pool.
Read the Victorian pool barrier inspection and compliance guidance.
A custom enclosure may be possible over an existing or freeform pool, subject to a site assessment. The enclosure does not necessarily follow the outline of the water. Track support, paving, pool-edge clearance, stacking space, drainage, equipment access and the safety barrier all affect whether a practical layout can be achieved.
Lead time depends on the approved design, specifications, material availability, delivery, permits and site preparation. Installation also depends on access, foundations, weather and the size of the system. Ask for a project-specific schedule with your quotation, and confirm it once the design and any required approvals are settled.
Follow the care instructions supplied for your panels, frame and moving parts. Use only approved cleaning products and methods; mild soap, water and a soft cloth are commonly suitable for polycarbonate. Keep tracks clear of debris and check seals, locks and moving sections. Ask before using solvents, abrasive cleaners or pressure washers, and stop operating any damaged mechanism.
Send Furite Outdoor Living your suburb, approximate pool dimensions and photographs showing the pool, surrounding paving, fencing and access. Include your preferred enclosure height and how you would like it to open. We can discuss suitable options and confirm site-measure availability and quotation details for your property.
Explore our retractable pool enclosure designs, browse completed outdoor living projects, or read more outdoor living FAQs.
Our Partners
We help customers choose suitable frame, roofing, glazing and motorised system options for Australian weather, council requirements and long-term outdoor performance.
